Purchasing Vinyl Window Lettering & Graphics  for your businesses Storefront Windows is easy and fun with Wall Words vinyl lettering, logos and graphics! below is a step by step easy ordering and installation instruction procedure to follow.

If you need any help you can always call us  1-888-422-6685 or email us via our on-line Help Desk

Save time and money! We know Business signage can be very expensive with traditional signage. You will find that Wall Words easy Vinyl lettering is both cost effective and durable for low cost signage needs!

Follow the easy instructions below and you will have a professional storefront with Wall Words!

Ordering

Step 1 - You can figure out all your lettering with our Custom Quote tool. Our tool will allow you to choose the text, font color and size you wish your lettering to be. For normal 1- to 10" lettering Click Here to use of 1-10" lettering tool. For really large lettering on big storefront windows you should Click Here use our 11-22" Custom Quotes Tool.

Step 2 - If you want to add your Logo to your installation then you can send us your artwork and order your logo with our handy Logo ordering tool Click Here

Step 3 - If your installation is going on the "inside" of your window just let us know when checking out by saying "for inside window" in the special instructions field. This will alert us to prepare the adhesive on the front of the Vinyl.

Installing

Step 1 - Surface Preparation
Use a tape measure or a ruler to determine the exact area where the quote will be placed. We recommend drawing a light horizontal guide line or use a small pieces of masking tape. Make sure the surface is clean and smooth. The quote will not adhere to stucco or brick like surfaces. Words can be cut apart and stacked in rows, put on an angle, or arranged around and on windows, doors or on most wallpaper. Taping them lightly in place first will help you plan your layout.When Receiving your product you should measure your window and be ready to stick on the vinyl. We will send you a special application tool to install your product with.

	Step 2 - Prepare Quote Some quotes will come in rolls because of the length. Unwrap the quote and let it set flat until it stops wanting to roll its self up. The quotes have a transfer tape (looks and feels like white masking tape) on one side and backing paper (white and shiny) on the other. Before peeling the back paper off, burnish (rub) the surface of transfer tape to insure the quote is adhered solidly to the transfer tape. (Letters may pull away from transfer tape during shipping)
	Step 3 - Application Douse the window with a small amount of dish soap and water  (use about 2 drops in a cup) Spread the row out with a cloth.
	Step 4 - Burnishing Use the squeegee (provided) to squeeze out the water (this will reduce bubbles) for small lettering you can also use a credit card. Be sure to squeeze all the excess water from beneath the letters. Flip up the quote and carefully peel the backing paper away from the quote, which should remain on the transfer tape. The quotes can not be repositioned, so be careful to line them up where you want them. Place the taped quote on the pre-measured surface, using the lines to position the vinyl correctly onto the surface.
	Step 5 - Transfer Tape Removal Carefully peel back the transfer tape. This will leave the quote on your surface. Enjoy your new professional storefront!.